Page 1 of 1
80GB: 03/31/2000-i440BX-W977-2A69KM4AC-00
Posted: Thu Feb 23, 2006 12:23 am
by hausl78
Hello Experts!
New 80GB IBM/Hitachi Harddisk - BIOS can not recordnize it!
Could anyone please help me and send a Patch to me with a BIOS-Update, that i can use this new Harddisk?
PC: Maxdata
Mainboard: MS6119 Ver. 1.2 BX2
*** Further Infos to BIOS ***
Program: eSupport.com BIOS Agent Version 3.45
BIOS Date: 03/31/00
BIOS Type: Award Modular BIOS v4.51PG
BIOS ID: 03/31/2000-i440BX-W977-2A69KM4AC
OEM Sign-On: VMP 1.0B9b * MSI MS-6119
Chipset: Intel 440BX/ZX rev 3
Superio: Winbond 977TF rev 0 found at port 3F0h
OS: WinXP SP1
CPU: Pentium® III (0.18 µm) With 256 KB On-Die L2 Cache 651 MHz
THANX A LOT!!!!
Juergen (hausl78)
Posted: Fri Feb 24, 2006 10:57 am
by NickS
This is an MSI (MicroStar) motherboard OEMed by Maxdata. I'll see what can be found, but meantime maybe you would like to save your existing BIOS, zip and email it to me? Put "Wim's BIOS" at the start of the subject line to avoid being discarded as spam.
Posted: Fri Feb 24, 2006 11:13 am
by NickS
I looked at a BIOS for the generic MSI MS6119 V1.2 a while back.
MSI MS-6119 v1.2 (MS-6119 CPU PnP) BIOS
OEM message: W6119MJ V2.9 120100 patched for HDD to 128 Gb
BIOS ID: 08/03/2000-i440BX-W977-2A69KM4AC-00
This patch does not correct hang-up problems with Standard CMOS Setup and IDE Autodetect menu. You may have to disconnect your HDD to enter Standard CMOS setup.
I guess it could be patched with apple_rom's patcher...
Posted: Fri Feb 24, 2006 1:42 pm
by hausl78
Hi NickS!
Thx for your help. Surely i will send you the bios, if you would tell me please how to read it out. (the .bin file??)
Many Thanks
Juergen
Posted: Fri Feb 24, 2006 2:08 pm
by NickS
I suggest you create a basic bootable DOS diskette from an image ("Driver free disk for BIOS flashing") at
http://www.bootdisk.com/ and use
Uniflash to read out the binary.
Posted: Fri Feb 24, 2006 10:05 pm
by hausl78
Thank you! I will send you the BIOS the next few days, because the PC belongs to a friend of mine, may be i can do it tomorrow.
But I already have downloaded the both programms and created the Bootdisk
thanks / greets!
juergen
Posted: Fri Feb 24, 2006 10:50 pm
by KURIAKI
Posted: Fri Feb 24, 2006 11:06 pm
by hausl78
THANK YOU KURIAKI, that was speedy!!
And the chance that the board (Ver. 1.2 BX2) will not be destroyed after flashing are good
- although its "beta"?
Now i need a Bootdisk (eg. the one that was created from the Link above (NickS) and copy the AWDFL757.EXE and the 10B9B_19.IDE on the disk.
In the Flash-Programm i use then the 10B9B_19.IDE File for updating.
Is this the correct way?? The .IDE File has 256KB, i think the Original has 128kb - ist this a problem?
Thanks a lot, i will inform you about the results!!
Juergen (hausl78)
Posted: Fri Feb 24, 2006 11:55 pm
by KURIAKI
Posted: Sat Feb 25, 2006 12:09 am
by hausl78
... and this equals to
http://www.supportbios.info/modelo.asp? ... &Idioma=EN
ok, so i understand!
I'll try it to flash and inform you if it is works correctly (othierwise i'll have to beg for your help again
)
THANK's
Juergen