Page 1 of 1

Tyan Tempest i5000px cpu support request

Posted: Sat Oct 26, 2013 11:51 pm
by ozlay
i recently acquired a Tyan Tempest i5000px motherboard and i wanted to upgrade the cpu's to something faster and well long story short the CPU's i got are not supported by the latest bios and i was wondering how to mod the BIOS and add the needed microcode for my new CPU's i am trying to get a pair of x5260's to work with the motherboard was wondering if someone could add the microcode for me or show me a tutorial or at least point me in the right direction :?

Motherboard: http://www.tyan.com/archive/products/ht ... 000px.html

Latest Bios: ftp://ftp.tyan.com/bios/S5380_v203b_beta.zip

Re: Tyan Tempest i5000px cpu support request

Posted: Mon Oct 28, 2013 1:13 pm
by edwin
Your hardware does not support 45nm Xeon 5000 series CPUs, ony 65nm Xeon 5000 series CPUs. A bios patch is not going to change that.

Re: Tyan Tempest i5000px cpu support request

Posted: Mon Jul 28, 2014 7:08 am
by ozlay
edwin wrote:Your hardware does not support 45nm Xeon 5000 series CPUs, ony 65nm Xeon 5000 series CPUs. A bios patch is not going to change that.
actually the bios has been moded and is now working with the new cpus iv also recently upgraded too a pair of quads so everthing is working fine now but thanks anyways

Re: Tyan Tempest i5000px cpu support request

Posted: Mon Aug 04, 2014 4:17 pm
by Denniss
Make sure the mainboard voltage regulators are properly cooled, if they are not designed for the 45nm CPU they will be strained a lot, producing excessive heat.
That's usually the main reason for non-support of newer CPU, the regulators were not designed for the high Ampere load on them.