BIOS Updates forum

Posted: **Mon Aug 26, 2002 1:29 am**

well i have to do further investigations but i think bios is f3 or f4
the board can do the right voltage (and below)
but no video signal...

can anyone tell me if the board/revision can handle a cumine so i know its not the board...
tia

Posted: **Mon Aug 26, 2002 2:22 pm**

Gigabyte says PCB 2.x and above have full coppermine support .
Versions below may or may not support VCore below 1.8V .
If you have a Socket-370 CPU in a CPU-Adapter set the VCore manually to 1.8V .

Posted: **Mon Aug 26, 2002 4:05 pm**

:lol: 1.8V are working thx

BIOS Updates forum

coppermine @ ga-6bxc revision 1.7

coppermine @ ga-6bxc revision 1.7