Page 1 of 1

my pc chips m810 sees my amd xp 1800+ as 1150

Posted: Tue Sep 03, 2002 1:25 am
by gorgans
i have a pc chips m810lmr rev 5 motherboard and i am using a xp 1800+ cpu, the computer only sees 1150mhz. i tryed setting the bios the cpu freq is set to 133Mhz but it still cant see 1800+. cand this board see xp 1800? how do i make see 1800+?

Posted: Tue Sep 03, 2002 1:33 am
by Denniss
Setting CPU/Memory to 133MHz should get full speed from your 1800+

Posted: Tue Sep 03, 2002 1:43 am
by gorgans
cpu freq is set to 133Mhz and Memory to 133MHz but it still don't see 1800+. i am using pc 133 memory.

Posted: Tue Sep 03, 2002 9:48 am
by Denniss
How old is your Bios ? > Check the release xx/x/xxxx string on boot-up screen .
With a Bios not knowing of Athlon XP you should see Athlon4 1533MHz or similar .

Posted: Tue Sep 03, 2002 3:21 pm
by gorgans
bios date 07/12/2001 s version 1.21.05
it says Athlon4 when booting up. if i choose 1533MHz in the bios i have restart problems. i have to unplug power to get it so bootup.

Posted: Tue Sep 03, 2002 7:15 pm
by Rainbow
First get new BIOS from ajzchips' page

Posted: Wed Sep 18, 2002 3:02 am
by xiaonian

Posted: Tue Oct 08, 2002 8:48 am
by th

Posted: Tue Oct 08, 2002 6:55 pm
by rmay635703
My suggestion is return the board if you can, if not you can either
1. Run the chip stable at 1150.

2. Buy a normal Athlon T-Bird 1400Mhz

3. Although the m810lmr rev 5 isn't fully compatible with XP chips, it can run them with a 100Mhz bus. If you are fairly knowlegable you can cut and pencil in bridges on the cpu to change the multiplier, the board can run the chip at 1500Mhz 100Mhz - 15x multiplier.

Look around the internet for more info if your up to "breaking" your cpu.

Good Luck