help!
Posted: Tue Oct 29, 2002 10:22 pm
Hello from Macedonia,
I have an UMAX PC with SL5000 motherboard and I have one problem. I put on CPU slot an 350Mhz Klamath but the machine report on start that I have an Pentium II on 233Mhz CPU. The MB bus is 66 Mhz and there is some jumpers which is setting the multiply factor. I put them to maximum (5x) but nothing, the bios still report the same PII on 233Mhz. Than I thought that is a good idea to upgrade the bios but I can not find anything on net about my PC .
Can You help me with some advice?
On the boot screen the bios reports:
"Award Modular Bios v. 4.51 PG
UDEX-N Rev. 1.1
06/12/1998 i440EX-W83977 *UDEX-N*C-00
Thank You
Best Regards
Kosta
Tetovo, Macedonia
19.10.2002
I have an UMAX PC with SL5000 motherboard and I have one problem. I put on CPU slot an 350Mhz Klamath but the machine report on start that I have an Pentium II on 233Mhz CPU. The MB bus is 66 Mhz and there is some jumpers which is setting the multiply factor. I put them to maximum (5x) but nothing, the bios still report the same PII on 233Mhz. Than I thought that is a good idea to upgrade the bios but I can not find anything on net about my PC .
Can You help me with some advice?
On the boot screen the bios reports:
"Award Modular Bios v. 4.51 PG
UDEX-N Rev. 1.1
06/12/1998 i440EX-W83977 *UDEX-N*C-00
Thank You
Best Regards
Kosta
Tetovo, Macedonia
19.10.2002