Rainbow-patched Abit LX-6C i440LX chipset (2A69JA1AC-7T)
Posted: Wed May 07, 2003 12:43 pm
Hi,
I flashed my BIOS for this board with Rainbow's patch (from the tested patches link).
I now want to change my slot 1 Celeron-300MHz to a Celeron 566 on a slotket (which a friend gave me gratis).
From cold-boot, the BIOS sees a Celeron-556MHz (yes, 556), but then refers me to CPU setup in the BIOS.
No amount of fiddling (with supposed correct settings of 66MHz FSB and 8.5x multiplier) gives any success; the machine locks at Verifying DMI pool; disabling 'hold on error' results in Win XP firing-up, then resetting the machine.
Anyone any ideas?
Cheers,
Steven.
I flashed my BIOS for this board with Rainbow's patch (from the tested patches link).
I now want to change my slot 1 Celeron-300MHz to a Celeron 566 on a slotket (which a friend gave me gratis).
From cold-boot, the BIOS sees a Celeron-556MHz (yes, 556), but then refers me to CPU setup in the BIOS.
No amount of fiddling (with supposed correct settings of 66MHz FSB and 8.5x multiplier) gives any success; the machine locks at Verifying DMI pool; disabling 'hold on error' results in Win XP firing-up, then resetting the machine.
Anyone any ideas?
Cheers,
Steven.
