Abit KT7A-RAID and Barton2500+
Posted: Mon Aug 25, 2003 4:52 pm
I succesfully patched A9 bios with highpoint raid 2.35 drivers and CPU recognition by rom.by (bios patcher).
The way I run the Barton on the board is trough a wire trick which enables all high multis.So I 'm running at 2266. I even changed some multis values in the bios (user define mode of Softmenu III) to match the new multis created by the wire trick (example : 17x instead of 9x etc...)
So, my question is this : is there a way to change also the values in auto mode (let's say 900 (100) to be 1700(100) )? Is it possible through some timetables? Could anyone guide me through the process?
regards
The way I run the Barton on the board is trough a wire trick which enables all high multis.So I 'm running at 2266. I even changed some multis values in the bios (user define mode of Softmenu III) to match the new multis created by the wire trick (example : 17x instead of 9x etc...)
So, my question is this : is there a way to change also the values in auto mode (let's say 900 (100) to be 1700(100) )? Is it possible through some timetables? Could anyone guide me through the process?
regards