DFI CW-35-S MOBO 600 Celeron upgrade to 700Celeron Problem
Posted: Sun Nov 09, 2003 10:49 pm
Appreciate any help
Motherboard is a DFI CW-35-S Revision C2 600Celeron processor
I obtained a 700mghz Celeron. Checked intel. Processor Specs are identical save The 6-700 Both are pc 66mghz. Checked DFI, Mobo
supports up to 700mghz processor. Should just change out.? Right?
Wrong! Switched them Try normal boot C,A does POST detects drives
then to Verifying DMI pool screen. Then auto reboots system and repeats
process. Is this a bios problem or a bad processor. possibly need bios
upgrade? Back to DFI Website cant make sense of which one is right if that is the case. Appreciate any response. Thank-you
Mobo DFI CW-35-S Intel 810 chipset Award bios Version 6.0 ID no.
1-810-DD-6A69MD43C-00
Also appreciate any thoughts on a a strange thing. This mobo "says" In Bios its runnin at 160 degrees on the processor, 85 on the chassis. This is B4 I ever thought of changing the Processor. Is this way too hot? or possibly inaccurate Temp.? the thing runs pretty decent It's been like that since I've had it.
Hope I'm not posting something already covered as I spent a while reading the posts before I did this. I love this sight It's always been very helpful and I recomend my friends to it Keep up the good work !!!!!!
Arnold
Motherboard is a DFI CW-35-S Revision C2 600Celeron processor
I obtained a 700mghz Celeron. Checked intel. Processor Specs are identical save The 6-700 Both are pc 66mghz. Checked DFI, Mobo
supports up to 700mghz processor. Should just change out.? Right?
Wrong! Switched them Try normal boot C,A does POST detects drives
then to Verifying DMI pool screen. Then auto reboots system and repeats
process. Is this a bios problem or a bad processor. possibly need bios
upgrade? Back to DFI Website cant make sense of which one is right if that is the case. Appreciate any response. Thank-you
Mobo DFI CW-35-S Intel 810 chipset Award bios Version 6.0 ID no.
1-810-DD-6A69MD43C-00
Also appreciate any thoughts on a a strange thing. This mobo "says" In Bios its runnin at 160 degrees on the processor, 85 on the chassis. This is B4 I ever thought of changing the Processor. Is this way too hot? or possibly inaccurate Temp.? the thing runs pretty decent It's been like that since I've had it.
Hope I'm not posting something already covered as I spent a while reading the posts before I did this. I love this sight It's always been very helpful and I recomend my friends to it Keep up the good work !!!!!!
Arnold