BIOS Updates forum

Posted: **Tue Mar 21, 2006 9:21 am**

He~~~~l~~~~~p~~~~~~
I have ThinkPad 600x-2645-3ek non speedstep model. (512MB RAM)
I exchanged PIII 450Mhz CPU to PIII 650Mhz.
WinXP was installed without battery (Only AC Power) after changing CPU.
Because there was stop during installation WinXP with battery, I removed battery.
I don't know why.
Another problem is also stop after installation WinXP.
My 600x stopped during booting.
When I pushed Fn+F2, booting went well.
Is there any solution to prevent stop during booting?
Cann't I use WinXP in my 600x?
(Do I comeback to the PIII450Mhz CPU if I use WinXP?)
I need your help!!!

Posted: **Thu Mar 23, 2006 2:56 am**

I think that the stops aren't depended by use of battery or ac power.

I can only say this thing!

Posted: **Thu Mar 23, 2006 4:26 pm**

Yes, if you change CPU after install Windows, of course they can't read the new CPU Processor, try install fresh Windows XP...

BIOS Updates forum

Cann't use WinXP after changing CPU.

Cann't use WinXP after changing CPU.