Page 1 of 1
Need patched VBIOS for PC Chips M871G (V1.5)
Posted: Sun Mar 23, 2008 11:10 pm
by txemamaster
I have purchased a 19" widescreen Benq LCD/TFT monitor but I can't configure to 1440x900 resolution.
Here is the link for motherboard/bios of the PC:
http://www.pcchips.com.tw/PCCWebSite/Do ... =6&LanID=0
Motherboard: PC Chips M871G (V1.5)
Chipset SiS 760
Thank you very much for this superb work you made.
Posted: Mon Mar 24, 2008 1:18 pm
by cp
get it at the download page :)
Posted: Mon Mar 24, 2008 10:29 pm
by txemamaster
Thanks for answer so fast, but I have a problem.
When I try to update the Bios with the Flash Utility, this program give me a message that tell me there's a problem with the Flash Utility and must be closed.
I updated today to the latest Pc Chips original Bios with the same utility and no problem.
Do you know what's happening?
Thank you very much for your work.
Posted: Thu Mar 27, 2008 12:53 pm
by KalleS
The version available on the download page seems to be broken, pls try this one instead (original PC-Chips BIOS but with VGA module replaced with most recent version v2.51):
http://rapidshare.com/files/102734162/050915S.zip.html
Please post feedback, thanks,
KalleS
Posted: Fri Mar 28, 2008 5:43 pm
by txemamaster
Thank you KalleS for your support. It really works but only at 50%, I explain.
I downloaded your zip and I updated the Bios without a problem. Now I can configure a 1440x900 resolution, but only with 16 bit colour.
If I try to set 32 bit colour my TFT send me a message that tell me it can't manage this mode.
I don't know what's happenging now but with 16 bit colour the monitor doesn't give its best performance.
Do you know what can I do now?
Thank you for your work guys.
Posted: Fri Mar 28, 2008 8:32 pm
by Denniss
Fully deinstall your driver and reinstall after reboot.
Posted: Wed Apr 02, 2008 8:07 pm
by txemamaster
No way guys. I tried to uninstall VGA driver, reboot and reinstall, but everything is the same, the colour depth only in 16 bits.
I don't know what to do, any idea?
Thank you very much for your support.
Posted: Thu Apr 03, 2008 1:01 am
by Denniss
Hmmm, strange. Tried to manually set this resolution to 60Hz refresh rate instead of 75Hz ?
Posted: Thu Apr 03, 2008 2:16 pm
by KalleS
If you really have installed the latest SIS drivers (v3.83, please check once again), then the reason for your error will certainly be a missing monitor driver (!, not graphics driver). Should be an .inf-file only, you can obtain it either from your CD-Rom or the Benq homepage. Try to install it (in Windows XP) with the hardware assistant. Good luck!
Re: Need patched VBIOS for PC Chips M871G (V1.5)
Posted: Sat Mar 05, 2011 8:52 pm
by agustin2004
please i need this bios update i download the bios from the page but de Vbios have not been updated i still have the 2.15.00 version
