Page 1 of 1

How to load vBIOS on MotherBoard: ASRock K7S41?

Posted: Mon Dec 01, 2008 7:22 pm
by ykbean
How to Set 1360 X 768 resolution on my LG W1941S LCD Monitor

MotherBoard: ASRock K7S41
VGA: SiS 741
Monitor: LG W1941S

Dear all,

I am not able to get the above resolution on my new monitor, it can only set to 1024 X 768.

I have done the following:
Update VGA driver to version UVGA3 3.85
Download new BIO to Version 2.60 but not able to load to the existing BIOS.

I follow all instructions from:

I use 775VM800/P4VM800/K7S41GX/K7S41 motherboards. Do these models support 1440x900 resolution?(7/21/2006)

If your board is K7S41, Please update BIOS to P2.30 or later and VGA driver to 3.73 or later version.

I have download the 2 files ASRflash.exe and K7S41_2.60 and put them into a floppy drive.
Then I go to CMD and type

A:\ASRflash K7S41_2.60

It gives these details:

DOS/4G Protected Mode Runtime Version 2.01a
Copyright (c) Tenberry Softare, Inc 1996
> Error 18 - Chipset/Flash part isn't available. The function will be invaild.

I put the floppy in and restart the CPU, its has so called booted but prompt me to remove all media and type any key to restart.

vBIOS version is not updated from 0.82 to 2.60

Anyway to deal with these?

Posted: Mon Dec 01, 2008 10:09 pm
by Denniss