Page 1 of 1

Not possible to boot from SATA DVD on DFI 661FX-MLV REV.C

Posted: Mon Mar 24, 2014 5:13 pm
by Sergii
Can't boot from sata DVD on DFI 661FX-MLV REV.C
SATA HDD can boot without issues
In BIOS I can find the only option for SATA- enable/disable.
During SATA drives detecting on boot detecting SATA HDD is quite fast, but for SATA DVD - several seconds.
From Windows SATA DVD working fine.


Is there any option to update BIOS and make proper SATA DVD detection during boot?

Re: Not possible to boot from SATA DVD on DFI 661FX-MLV REV.

Posted: Tue Mar 25, 2014 9:42 am
by edwin
What brand/model is the DVD drive? Does it boot properly on other boards?

Re: Not possible to boot from SATA DVD on DFI 661FX-MLV REV.

Posted: Tue Mar 25, 2014 11:53 am
by Sergii
DVD drive is LG-GH24NS50 , 3 years old and working fine on GIGABYTE GA-880GA-UD3H (rev.2.1)

http://www.lg.com/hk_en/optical-storage/lg-GH24NS50
http://www.gigabyte.us/products/product ... id=3520#ov

Re: Not possible to boot from SATA DVD on DFI 661FX-MLV REV.

Posted: Tue Mar 25, 2014 3:31 pm
by edwin
There's a possibility it has old firmware, can you check if you have the XP02 firmware with Discinfo?
http://discinfo.rpc1.org/
(remove serial number from the report if you are going to post that!)

Re: Not possible to boot from SATA DVD on DFI 661FX-MLV REV.

Posted: Tue Mar 25, 2014 5:30 pm
by Sergii
I can confirm that firmware version is XP02 as because I had flashed it myself

It is strange that in latest versions of motherboard BIOS missing option to switch to IDE mode of SATA controller.
Option should be still present in 661LDB10.BIN version (according to release note next version 661LDC08.BIN has REMOVE SATA MODE ITEM)
I am afraid to flash it because my CPU is Prescott 3.0GHz/ FSB800 and possible not supported by first release of BIOS

Is it possible to add SATA MODE ITEM (RAID/IDE) in latest BIOS 661LD803.BIN?


Attached both BIOS versions:

661LDB10.BIN - BIOS version supposed with SATA MODE ITEM available, but not support Prescott CPU
661LD803.BIN - latest BIOS support Prescott CPU,but SATA MODE ITEM removed and SATA controller works only in RAID mode

Re: Not possible to boot from SATA DVD on DFI 661FX-MLV REV.

Posted: Wed Mar 26, 2014 5:51 pm
by edwin
We'll see if the SATA controller has its own loadable module, if yes, this might be not too much work. If it is in the core however, it's almost impossible to fix...

Re: Not possible to boot from SATA DVD on DFI 661FX-MLV REV.

Posted: Thu May 15, 2014 5:07 pm
by Sergii
Edwin, can you please take a look to that BIOS if possible to fix SATA boot? By the way, can't detect revision of my board: on pcb printed rev B, but on label rev C. I flashed all found in internet BIOS versions and board boot with all of them. Just on some versions it makes reboot after powered ON (two times beep). And I can see CPU run all the time 3GHz , it means possible board not fully support my cpu (Intel Pentium 4 Prescott 3GHz/800MHz/1MB SL7E4).