Page 1 of 1
dual agp/pci graphics adapters
Posted: Thu Dec 08, 2005 12:40 am
by adl22_05
ok i have 2 graphics adapters, 1 on agp, and 1 pci i want the one in the agp slot to be my main monitor and my pci slot one to be a secondary...........ive done everything i can think of to do this but it wont work it always boots and runs the pci slot adapter instead.......any ideas would help............sry about so few details..........i dont have tham in front of me right not...........thanks
Posted: Thu Dec 08, 2005 12:47 am
by Denniss
There should be a Bios option to switch Primary VGA device from AGP to PCI and vice versa.
Look for an option like VGA boot from or Primary VGa device, then switch it to AGP.
Posted: Thu Dec 08, 2005 7:15 am
by adl22_05
i did that already and its having no effect...........thnx for trying though
Posted: Thu Dec 08, 2005 7:36 am
by adl22_05
p.s. i have palette snooping(sp) enabled as well any help would b appreciated
Posted: Thu Dec 08, 2005 11:55 pm
by Denniss
VGA palette snooping should be an option for a different thing, leave it as disabled.
What motherboard do you use and what's the bios version installed ?
What PCI and AGP cards are you using ? It is possibel both cards don't like each other.
Posted: Sun Dec 25, 2005 8:09 am
by Ritchie
Any luck?
If the option that Denniss describes has no effect, I wonder if this is a bug in the BIOS.
