Page 1 of 1

sis650 in AsROCK GE Pro-HT

Posted: Mon Jan 07, 2008 2:50 pm
by - PaK -
Hi...

could someone help me with a patch for this BIOS? AsRock support is non-existant, and after updating everything on the machine I have found the "VBIOS" as SIS calls it, is still at 1.11.29. I need minimum 2.28.00

Info from SiS

If your VBIOS version is not 2.28.00 or later, you have to update your BIOS, please contact your board maker or system provider to get BIOS update support

The board uses AMIBios and I can't chnge the vbios into AmiBios module.

Link to my oryginal Bios http://www.asrock.com/mb/from.asp?Model ... T=B&ID=237

I've 22" NEC AccuSync LCD monitor and I steel work with 1024*768, byt max resolution in 1680*1050 i avilable, but screen is steel white :(

Motherboard: AsRock GTe Pro-HT
Bios: AMIBIOS rev. 2.40
Adapter type: Sis_650_651_M650_M652_740
VBios: 1.11.29
Chip type: SiS 651
Driver version: 3.73 (there is 1680x105 resolution yet, but with white screen)

Posted: Mon Jan 07, 2008 8:59 pm
by cp
patched bios sent.

Posted: Mon Jan 07, 2008 9:55 pm
by - PaK -
Thx for a patched bios.

I'll going to try it tomorrow in work.
Afther that i'll give You my opnion about this bios. I hope It'll work O.K.

Thank You For Your interesting my problem.

see ya tomorrow morning.

Posted: Tue Jan 08, 2008 9:15 am
by - PaK -
Hi cp

Thx a lot for a patched bios for my Ge Pro-HT motherboard.
It's work property.
Just i've see my 1680*1050 resolution on my NEC 22" monitor.

Best regarts
- PaK -
from Poland :)

Posted: Tue Jan 08, 2008 10:18 am
by cp
you are welcome :)

Posted: Thu Oct 09, 2008 10:57 pm
by peter_bols
HI,

I have the same motherboard, and the same problem.

Please help me with a bios update.

TXS


WFR

Peter

Posted: Fri Oct 10, 2008 4:52 am
by Denniss
Read the sticky thread ......