Page 1 of 1
1440x900 bios update for Asus Terminator P4 533A Sis 651
Posted: Mon Jan 28, 2008 3:45 pm
by C_Burns
I bought a wide screen monitor and need bios update for my Asus Terminator P4 533A with Sis 651.
Updated VGA driver to Sis uvga3_373 but still no 1440x900 support.
Please help.
Many thanks.
Posted: Mon Jan 28, 2008 5:48 pm
by cp
read this:
http://www.wimsbios.com/phpBB2/topic9748.html
don't forget about the DIRECT LINK :)
Posted: Tue Jan 29, 2008 3:32 am
by C_Burns
I am using the 1014.001 beta version bios.
Direct link is:
http://dlsvr01.asus.com/pub/ASUS/Barebo ... 4cea01.zip
Many thanks
Posted: Tue Jan 29, 2008 6:22 pm
by cp
sent
Posted: Thu Jan 31, 2008 2:53 am
by C_Burns
cp,
thanks for the mod
but still have problem
flashed the mod bios, loaded the default settings, reboot and updated VGA driver to Sis uvga3_373 but still cannot find the 1440x900 option at the display adapter [list all modes].
have I missed out any steps in between?
kindly advise.
Posted: Thu Jan 31, 2008 10:16 am
by cp
please post the version of the video bios. it is shown in the video adapter settings.
Posted: Thu Jan 31, 2008 11:22 am
by C_Burns
cp,
The video bios version is still 1.10.08 after the patched bios is flashed.
Posted: Thu Jan 31, 2008 1:36 pm
by cp
sorry, i picked the wrong file. my fault. i'll send you a patched version later today.
Posted: Fri Feb 01, 2008 2:51 am
by C_Burns
cp,
thanks for the revised patched bios.
flashed and updated video bios to 2.30.01
reinstall the Sis uvga3_373 driver, reboot but still no 1440x900 option
can't figure out what went wrong
any suggestions?
many thanks anyway
Posted: Fri Feb 01, 2008 8:14 am
by C_Burns
finally I got it figured out
the culprit was the installation method of the SiS driver
originally, after I uninstalled the old driver and reboot, at the Windows Found New Hardware prompt I just directed the prompt to where I put the latest SiS driver. Update and reboot. No luck there was no 1440x900 option.
I uninstalled the driver again, reboot and I just ignored the Windows Found New Hardware prompt. Instead I used the SiS setup programme unpacked from the SiS driver zip file.
Reboot and there is the 1440x900 option!
Thanks again, cp
Posted: Fri Sep 19, 2008 10:10 pm
by mzeist
I have the exact same problem, could you sent me this bios also, please?
Posted: Sun Sep 21, 2008 9:39 am
by cp
get it at the download page. read the sticky thread in this section to find out how to get to the download page :)