Page 1 of 1
Getting error message"chipset/flash not found
Posted: Fri Apr 05, 2002 5:04 am
by maxblast
I have a ecs k7s5a version 3.1 board . Am trying to flash the bios using ami818 utility and 020206l.rom file. Problem is I keep getting a message that the "chipset/flash was not found, this command is invalid at this time". I do not see anything in the manual about a write protect jumper for the bios. Is there something I am missing ,is there a jumper? Thanks
Posted: Fri Apr 05, 2002 8:39 pm
by Rainbow
Try another version of AMIFlash.
Posted: Sat Apr 06, 2002 11:30 pm
by Denniss
ECS recommends Aminf329 or higher !!
www.ecs.com.tw
I have the same board
Posted: Fri Apr 12, 2002 8:02 am
by Rychster
Have you correctly entered the information to start the upgrade at the DOS prompt?
A:>ami818 020206l.rom
That said, I used the latest flash program at the ECS site in place of ami818 and it worked for me. That manual for the K7S5A is a piece of you know what. They don't even have the Pin 1 locations right.
