Page 1 of 1
dip to plcc adapter pinouts
Posted: Sun Aug 04, 2002 3:39 am
by gsmpower
i want to burn my bios chip winbond w29c020p-12 plcc that is damaged
and i need pinouts for dip to plcc adapter to make it myself
any help ???
greedz
gsmpower
Posted: Sun Aug 04, 2002 11:44 am
by Rainbow
Get datasheet for Winbond W29C020 at
http://www.winbond-usa.com/products/win ... 9c020c.pdf. There's pinout for both DIP and PLCC versions so the adapter should be easy to do.
Posted: Sun Aug 04, 2002 4:30 pm
by joegib
There is a schematic for a DIL32 —> PLCC32 adapter here:
http://se-ed.net/mpu51/eprom/eprom.html#SCHPCB
The PCB is fairly big so you need to raise it to avoid obstructions like capacitors, ISA/PCI slots etc. I used a stack of DIL32 sockets.
Posted: Mon Aug 05, 2002 9:15 pm
by gsmpower
thank you for replys
have a nice day (or night)
greedz
gsmpower