Page 1 of 1

Help finding BIOS upgrade option for PC CHIPS m761 ver. 1.1

Posted: Tue Sep 24, 2002 10:08 am
by jrichara
Help!

I installed a new hard drive on my system for the first time this past weekend, a Western Digital 80GB drive that requires an Int13 redirector in order to access the drive. My BIOS code is:

61-0917-001437-00101111-071595-440BX-M761-v1.1-8671-H

From what I gather, there does not appear to be any Flash files that allow me to reprogram this BIOS, but that's just an educated guess. How do I go about upgrading my BIOS? I'm looking at installing Windows XP soon, and don't know how to work around the Int13 redirector that exists on the drives MBR.

Posted: Tue Sep 24, 2002 10:24 am
by Rainbow
Looks like PC Chips M761 board. To be sure, identify it at http://go.to/th2. Then get the BIOS from ajzchips page http://go.to/ajz

Realize that it is PC CHIPS M761 - but where's the BIOS?

Posted: Tue Sep 24, 2002 5:11 pm
by jrichara
Thanks Rainbow,

Have checked the site that you suggested. However, the site only has the update code for M761-v1.3, M761-v3.1. The only stuff that the site has for M761-v1.1 is a pdf of the manual for the board, a picture of the board, and jumper switch diagrams for the board--but no BIOS upgrade!?

Does anyone know if the PC CHIPS M761-v1.1 ever had an upgrade for its BIOS, or does this mean that I had to upgrade the whole motherboard?

Thanks for helping this "under-the-hood" newbie!

Posted: Tue Sep 24, 2002 7:25 pm
by Rainbow
I think that the v1.3 BIOS should work with your board. ajzchips should know more.

Posted: Tue Sep 24, 2002 8:28 pm
by ajzchips
Unless PCCHIPS directly specifies this in their BIOS download page, all V1.x use the same BIOS, and all V3.x use the same BIOS.

If the BIOS mentions _V1.3_, it just means that they posted the BIOS update for the V1.x revision of their board when the latest revision of the V1.x was 1.3.

Posted: Wed Sep 25, 2002 3:21 am
by jrichara
jrichara here again!

The reason that I'm not sure about the BIOS upgrade is this posting in April by kulbit:

Hello I need your help
i am calling from Macedonia
I have a motherboard PC CHIPS M761 v1.1 with
128kb bios. I need to know does it support P3 on 700
MHz or what is the maximum processor that this board
supports with or without flashing the BIOS if it is
necessary.
If you know the flash so i could udpate my BIOS.
I found 990730.rom (is this the one?)and aminf332.exe but when i try it i get:
Chipset type- Intel 440BX/440-ZX
Flash Part - Winbond 29EE011
Old BIOS - 09/17/1998 S
New BIOS - 07/30/1999 S
Old Bios Tag is <761_V1.1-8671> -- New Bios tag is<761_V1.2>
Error9 - The BIOS tag is incorect
Press[Enter] key to continue or [Esc] to abort..
Thanx
In my case it would seem that I'll get the Error message:

Old Bios Tag is <761_V1.1-8671> -- New Bios tag is <761_V1.3>

Why didn't v1.2 work as a replacement for v1.1?


Sorry for being a pain about this, but I have no desire to wreck my motherboard--yet I really need to install Windows XP on my system.

Thanks again for any help!

Posted: Wed Sep 25, 2002 10:22 am
by NickS
If the BIOS tag changes, the utility complains. Some manufacturers changed the BIOS tag with each release of BIOS for the same motherboard, possibly to prevent people from flashing unless they knew what they were doing :) If the version of Award flasher you have does not let you ignore this, use UniFlash.