BIOS Updates forum

Posted: **Thu Jun 23, 2005 1:54 pm**

...which leads us back into whether the TPC is supported in UniFlash...

Posted: **Fri Jun 24, 2005 1:19 pm**

I suppose there is no luck with this board ...

Posted: **Sat Jun 25, 2005 11:44 pm**

28F2000T is supported and tested. These chips need 12V for programming. Maybe there's a jumper on the board to switch VPP between 5V and 12V.

Posted: **Mon Jun 27, 2005 3:38 am**

Rainbow wrote:Maybe there's a jumper on the board to switch VPP between 5V and 12V.

That are the only jumpers on the board...

JP5 ..... CMOS Clear Jumper
JP10 ... Power On by Keyboard Jumper
JP44 ... WOL (Wake-On-LAN) 3-pin Header

Unknown flash type!?!?