Page 1 of 1

I can't update my MS-6380 (K7T266 Pro-R)

Posted: Fri Jan 24, 2003 8:09 pm
by Fila
I have problems with my Mobo (relatively minor ones). The mobo works just fine until the first reset or when i try to increase the AGP Aperture Size or if i try to make it use the default High Performance option from BIOS.

So i decided to update my BIOS to the latest version but i have a problem. More info at this url (since i couldn't get an answer from MSI boards).

Also i tried looking for a jumper but didn't found anything relevant.

http://www.msi.com.tw/program/e_service ... 1&page=1#3 (i am SLO_Fila).

Posted: Fri Jan 24, 2003 10:58 pm
by NickS
The stuff in 6380v37.exe, if that's the BIOS you are looking at, takes under 900Kbytes. There should be plenty of room on a 1.44 MB diskette for that and msdos.sys, io.sys and command.com. You don't want any himem.sys, config.sys etc., just a plain bootable diskette and the flash and ROM files.

Posted: Sat Jan 25, 2003 1:17 am
by Fila
The stuff in 6380v37.exe
No it's 6380v19.exe because it's not the 2nd version.