Page 1 of 1

system boot A-TREND ATC-6150

Posted: Tue Feb 18, 2003 11:05 am
by freezer95
boot failure, please insert boot diskette;

that all i get now,

can not start with my windows boot diskette, or do anything else.


in the bois i think everything is OK.

this is about a A-TREN ATC-6150 mainbord.


(what is did, ...i just put a new cd-recorder in the system. after thant nothing work. if i remove this cd-recorder, still the same problem.)

Who can help????

Posted: Tue Feb 18, 2003 3:21 pm
by NickS
You cannot boot from diskette ? With all IDE cables disconnected and CMOS cleared ?

Posted: Tue Feb 18, 2003 4:40 pm
by freezer95
thats my problem over here, even when everything is disconnect.

Posted: Thu Feb 20, 2003 2:43 pm
by NickS
Is it completely dead, nothing on screen, no beeps ? If so, have you tried another PSU ?[edit] Silly of me, you get the "insert diskette" message - but it really will not boot a DOS diskette ? Check your diskette type setting is 1.44, try another FDD......

Posted: Thu Feb 20, 2003 3:32 pm
by soupy
Go into the CMOS setup, and auto-detect your HDD.

Posted: Fri Feb 21, 2003 10:57 am
by freezer95
all trying to to this but nothing works.
in bois i'll see the harddisk, and the cd-players, and the 1.44 station.
after starting , it end just after finding the IDE (HD ,CD player) .
the system wait a minute or 2, and then give me the message failure, put boot diskette and press enter.
When i do that, nothing happens, it give al black screen with the cursur.
not possible to type anything.