Page 1 of 1
BX133-Raid bios help
Posted: Thu Mar 13, 2003 4:15 am
by Drew_88
I keep getting a boot block error, and when i try to install new bios, i get an unknown flash error with a checksum D4FEH, im using award flash and drdos to try and flash. can someone help?
Posted: Thu Mar 13, 2003 4:27 pm
by Rainbow
Abit BX-133 RAID is one of the boards where Awdflash does not work properly with BootBlock BIOS. UniFlash v1.30 will include some support for this board but it does not seem to work correctly - I was not able to flash Winbond W49F002U correctly. However, the unprotecting works OK.
Posted: Fri Mar 14, 2003 4:52 am
by Drew_88
well, i have a winbondW83977EF, i get bootblock...awdflash wont work...says i need to update my ROM BIOS first...and i tried uniflash, but when i open it, i cant flash for some reason
Posted: Fri Mar 14, 2003 2:21 pm
by Rainbow
Winbond W83977EF is Super I/O chip. The Flash ROM chip is the one with Award sticker on top. You can see chip manufacturer and type if you peel off the sticker. I can send you UniFlash v1.30 BETA with SOME support for Abit BX-133 Raid board.
[edit]:
The support for BX133-RAID is in fact in UniFlash v1.29 - so you can try it.
Posted: Sun Mar 16, 2003 2:16 am
by Drew_88
when i try to use uniflash, it wont let me flash for some reason, and when i try with awd, it says i need to update the ROM BIOS
Posted: Sun Mar 16, 2003 11:46 am
by Rainbow
Does UniFlash v1.29 detect the Flash ROM chip?
Posted: Sun Mar 16, 2003 11:18 pm
by Drew_88
not sure, how can i check?
