Page 1 of 1

486 bios

Posted: Mon Apr 22, 2002 11:35 am
by Apacer
Can you still update this bios. I can't find an update anywhere.

40-0500-D1131-00101111-070791-UMCWB-F

ROM BIOS
UM486 V1.4 03-24-92


Please Help. I need to install a CD ROM Drive, but it doesn't reconisge it.
I am Running Windows 95B and it will detect that there is a CD ROM, but it won't read any discs.

Posted: Mon Apr 22, 2002 2:44 pm
by Rainbow
CD-ROM works without any support from BIOS. It's detected by newer BIOSes to allow CD-ROM booting. If the drive does not work, make sure that it's OK (check on another machine).

Posted: Tue Apr 23, 2002 2:49 am
by Apacer
I have already tried that option and it works fine. I have also tried to put a newer CD ROM in the 486 but it says "Windows Protection Error. Please Reboot your system" in DOS and just keeps going in a "Loop."

Also if this is any help, Sometimes it displays its proper ID in the device properties, as "Mitsumi CR-4804TE" and it will dectect every CD as an audio disc, but most of the time it displys a whole heap of other characters such as "MÜÿsT þýõ $"

Posted: Tue Apr 23, 2002 10:41 am
by Rainbow
Maybe you have some IDE controller problems.

Posted: Tue Apr 23, 2002 8:58 pm
by edwin
Flakey power supply or the IDE cable is too long/bad. Try a shorter known good cable and/or a known good power supply.