Page 1 of 1
I need help on a zp-5v1 bios upgrade
Posted: Tue Sep 23, 2003 5:08 pm
by commercesooner
Anyone know where I can find this bios upgrade. We have several of these in computers at our school and we're trying to upgrade to windows 98( I know, upgrade to windows 98 is a
, but this is a poor public school in Oklahoma.) Anyway, I need the bios upgrades, it wont accept windows 98 without them. PLEASE help
Posted: Tue Sep 23, 2003 5:23 pm
by Rainbow
What's the BIOS ID string
Posted: Tue Sep 23, 2003 7:25 pm
by soupy
What message do you get when the Win98 install fails?
how do I get the Bios ID String?
Posted: Tue Sep 23, 2003 7:30 pm
by commercesooner
How do I get the Bios ID String? I get an error something like configcmg
config.sys can't load. I don't have the computer in front of me. I'll get back there asap and put down the exact error.
Posted: Tue Sep 23, 2003 7:34 pm
by soupy
Run Bios Agent and post full results here to determine BIOS id.
http://www.esupport.com/biosagent/index.cfm?refererid=1
It looks like it may be a Zaapa motherboard, but they don't seem to offer any support, so hopefully it will have a FastFame equivalent.
Have a look at the motherboard and see if this is it:
http://www.fastfame.com.tw/ENGLISH/PRODUCT/5V1MV.htm
Bingo
Posted: Tue Sep 23, 2003 9:05 pm
by commercesooner
That looks like the one to me. How do I download the bios from that site? I downloaded a file, it is a .bin, there is no executable. Thanks a TON for all the help. We're getting closer, I can feel it.
ok, the error is
Posted: Tue Sep 23, 2003 10:13 pm
by commercesooner
The error I get is:
While Intitializing device CONFIGMG: Windows Protection Error. You need to restart your computer.
So, Uh?
Re: Bingo
Posted: Wed Sep 24, 2003 10:07 am
by NickS
commercesooner wrote:That looks like the one to me. How do I download the bios from that site? I downloaded a file, it is a .bin, there is no executable. Thanks a TON for all the help. We're getting closer, I can feel it.
You need to download the program which writes that BIOS .BIN file into the PC'S BIOS Flash EEPROM,. You'll find this described as a BIOS Flasher program, AWDFLASH being the one created by Award for their BIOSes and it will have a name along the lines of awdfl822.exe. The FAQ on the main Wim'sBIOS site covers the basics of how to flash, or there are instructions on almost every motherboard manufacturer's website. In outline:
- Check for any "flash enable" jumper or setting in the CMOS setup
- create a bootable diskette with no config.sys or autoexec.bat and copy onto it the flash program and the binary image, then boot from the diskette.
- Take a backup of the existing image using a command along the lines of
"awdfl822 savebios.bin /sy/pn"
- Flash the new BIOS using a command along the lines of
"awdfl822
biosname.bin /sn/py/cc/cd"
well, darn
Posted: Wed Sep 24, 2003 5:27 pm
by commercesooner
Well, the bios at the fastfame site didn't match my hardware. Anyone have any other ideas? I can't run the bios string program because I can't get into windows. I basically can get to a dos prompt and that is it. Any ideas?
Should I just get a different motherboard for this old P1 MMX?
Posted: Thu Sep 25, 2003 9:57 am
by NickS
You can get a DOS version of the BIOS agent program, it says further down the page linked to above. There's a link to the
feedback/DOS downloads page near the bottom.
When you say the BIOS doesn't match your hardware, what specific error do you get ?
