Intel RC440BX board. Flashed from P04 to P08 fine. P14 not.
Posted: Sun Dec 14, 2003 10:37 am
I don't want to fry my mainboard by doing this wrong. I've tried exactly what Intel advised regarding making the boot disk for 4R4CBOXA.86A.0020.P14.
When I boot with this disk it seems to run the program and tells me to remove the disk and reboot. But everytime (tried at least 10) I go into setup the BIOS is the same.
However the disk that I made from Gateway for P08 worked fine. But I'd like to get P14. Could I move the info for P14 over to said disk and use the .bat file that worked?
Just wondering if any of you could help me.
When I boot with this disk it seems to run the program and tells me to remove the disk and reboot. But everytime (tried at least 10) I go into setup the BIOS is the same.
However the disk that I made from Gateway for P08 worked fine. But I'd like to get P14. Could I move the info for P14 over to said disk and use the .bat file that worked?
Just wondering if any of you could help me.
No more Gateway and a new BIOS to boot(pun intended). Thanks again for the advice.