Page 1 of 1

Need help upgrading please

Posted: Sun May 05, 2002 2:59 pm
by dredg
Hello all.

I am upgrading my BIOS on my PC-Chips (yeah i know) mobo. The upgrade proggie is AMINF331 and the newer BIOS is 0204155. The paths are as follows:

C:\aminf331\AMINF331.EXE
C:\aminf331\0204155.rom

I am using windows XP. The problem is when im at the command line and type 'C:\aminf331\AMINF331.EXE', it runs for a second then says 'Chipset/Flash part not available. This function will be invalid.'

What am i doing wrong ? I have searched around for a different upgrade program, but cant find one. The link from this site is down. Is it because im in XP?

Any help would be appreciated.

Posted: Sun May 05, 2002 3:16 pm
by ajzchips
Read our FAQ (main site) regarding flashing procedures, and under which OS these are possible.

OK, done it.

Posted: Sun May 05, 2002 3:57 pm
by dredg
Did it to see if it would stop my system crashing.

Unfortunately it hasnt.

Thanks for the reply AJZCHIPS

Posted: Sun May 05, 2002 9:27 pm
by Rainbow
Crashing? Check memory http://www.goldmemory.cz

Posted: Sun May 05, 2002 11:54 pm
by edwin
I might buy this one. I know for a fact now it WORKS. Was able to lead back many problems on two different machines to bad RAM. Saved a lot of time :)