GATEWAY BIOS help
Posted: Sat Mar 31, 2007 4:44 pm
This is what I do know.
The BIOS file is SE2609P.bio
I have already been able to get boot from EFI working however I need to remove the entire GateWay logo and replace it with a custom one.
I've tried all of the iflash instructions I can find without any success and instructions from do-gooder's who have untested suggestions and possible solutions have only eaten up my development time that it has expired so I need a solution now.
I'm no longer interested in instructions that don't work and have not been tested or temporary solutions that are supposed to write to the USR space that I could never verify work since I could never get iflash to do anything but flash the current bios file.
I'm looking for a permanent but simple solution that requires no knowledge or experience other than inserting a floppy or CD or some other automated approach.
I can provide a board if required as I have a couple of extras since I just want/need a solution.
I might even be willing to cough up a little cash to obtain my results provided you can achieve my results within a reasonable time period.
Just e-mail to get the ball rolling.
Code: Select all
Manufacturer : Intel Corporation
Product Name : D915GUX
Version : AAC85199-201
Serial Number: BTUX44702493
I have already been able to get boot from EFI working however I need to remove the entire GateWay logo and replace it with a custom one.
I've tried all of the iflash instructions I can find without any success and instructions from do-gooder's who have untested suggestions and possible solutions have only eaten up my development time that it has expired so I need a solution now.
I'm no longer interested in instructions that don't work and have not been tested or temporary solutions that are supposed to write to the USR space that I could never verify work since I could never get iflash to do anything but flash the current bios file.
I'm looking for a permanent but simple solution that requires no knowledge or experience other than inserting a floppy or CD or some other automated approach.
I can provide a board if required as I have a couple of extras since I just want/need a solution.
I might even be willing to cough up a little cash to obtain my results provided you can achieve my results within a reasonable time period.
Just e-mail to get the ball rolling.