Page 1 of 1
Dead MSI 6168 Mainboard
Posted: Sat Jun 22, 2002 2:53 pm
by rdejager
Can someone please help me with my MSI board? When a friend give me the slot 1 board he said it was working but when i put my pIII 450 MHz proc. in it it was totaly DEAD! What can i do??
Posted: Sat Jun 22, 2002 3:02 pm
by Rainbow
Verify that the jumpers are set correctly and try another CPU.
Posted: Sat Jun 22, 2002 5:33 pm
by rdejager
I've tried to (uniflash) the bios of the msi board even that won't help. (the flash succeeded) The proc. comes out a working computer and even the jumpers were alright
Posted: Mon Jun 24, 2002 7:55 am
by edwin
Triple check all cabling and go to a basic setup.
power supply + power cable to wall outlet
motherboard
processor
front panel speaker
power switch
power on, the board should beep because no memory found
power off, add one stick of memory, power on, it should beep no video, power off, add video card, power on, you should be seeing the POST screen and a message about no keyboard.
if it does not react during these first steps you'll know where to look.
Posted: Tue Jun 25, 2002 7:52 pm
by rdejager
On my MSI Board is everything Intergrated so i cant folow the steps
But when I start the board with or without Ram I doesn' t Beep at all
