Page 1 of 1

ABIT BE6-II Flashing Trouble

Posted: Tue Feb 03, 2009 1:11 am
by miki02131
While hotflashing, I accidentally flash my working system with the wrong bios file. When I try to recover by booting the computer with a bootable floppy, I got the following prompt:

Award BootBlock Bios V1.0
Bios ROM Checksum error
Detecting Floppy Drive A...
INSERT SYSTEM DISK AND PRESS ENTER

Here is the content of the Floppy: IO.SYS, COMMAND.COM, MSDOS.SYS, AWDFLASH.EXE, BEH_70.BIN

The questions are:
1- Why Can't I use the floppy to reflash the bios correctly?
2- Is there something wrong with the floppy? If so, how do I prepare correctly a valid system disk?

Thanks,

Posted: Tue Feb 03, 2009 10:09 pm
by edwin
how was that floppy made bootable? by using the drdos flash disk image from http://www.bootdisk.com because that one should work at all times. I suspect you don't have a working board you can use to hotflash this chip with?