Page 1 of 1

Do I need an older version of Phoenix Crisis Recovery?

Posted: Wed Jun 08, 2011 8:25 pm
by rfdes
I managed to corrupt my Phoenix bios. I get a dead screen, audible post beep indicating check-sum error and
the boot block firmware is activating the floppy (yes.. an old floppy) drive awaiting a recovery disk. I made
a bootable floppy using a version of Phoenix Crisis recovery, but it doesn't work. I am not sure whether my
bios files are in the proper format. My version of bios is in the BIOS.ROM and PLATFORM.BIN format and I
believe that my recovery disk doesn't like this. The PHLASH.exe is a bit older also.

Is there any truth to my statements? Do I need an older Phoenix Recovery disk that would support this older
file format? If I do, where would I find this older recovery disk? Is it possible to convert my bios images to
the proper format so that I can use a more recent version of Crisis Recovery?

your help is greatly needed. This PC controller board, while old (~1998), has a VXI backplane and its important
in supporting a piece of instrumentation. I appreciate any help that you can offer.


Re: Do I need an older version of Phoenix Crisis Recovery?

Posted: Mon Jul 04, 2011 11:19 am
by edwin
Can you provide a link where you downloaded the bios file and the recovery disk? This way we can check if the 2 of them are compatible.