award force bios remote via serial or usb or other pc

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
ROBAX
New visitors - please read the rules.
Posts: 3
Joined: Wed May 30, 2012 1:16 pm

please help me

my motherbord "ga-m56s s3" canot boot black bios to the display :?

gigabyte mother bord Will not start 8O
only "active power fan and cpu fan and hard disk " and 1 beep and display Wink standby :cry:

how can remote mobo fail"ga-m56s s3 " to refresh or recovery bios Do with other computer by usb or serial or ide or com port or other port standard :!: :?:

:arrow:
Top
edwin
The Hardware Archivist
Posts: 6287
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:
Contact edwin

Check the capacitors near the CPU, most likely the top is not perfectly flat, they need replacement. See http://www.badcaps.net for more info as this board has been reported for having bad capacitors. They are from a good brand (United ChemiCon) but a low-tempgrade series so used in the wrong location. Reason: cutting costs, this is a low-end board after all.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Top
Post Reply

Return to “My motherboard is dead”