Page 1 of 1
bios of the MB k7s5ä2 E.C.S.(award) in the MB k7s5ä (AMI)
Posted: Sat Jul 27, 2002 7:10 pm
by fedy2
I have installed thanks to a link erratto the bios of the MB k7sä2 of the ECS (of the award) in the chip bios of the MB k7sä (of AMI, winbond just w49f00ù). The PC set offs, does not recognize the floppy one, pear tree can make to start the applications of flash: amiflash, award etc.. The application amiflash gives an error to me flash/part isn' t available... Entering in graphical modality/x, I succeed in setting correctly (in automatic rifle does not recognize null) but they give an error to me when verification the written data. How I can replace the bios correct? excused my English
Posted: Sat Jul 27, 2002 7:24 pm
by Rainbow
Try to reflash it using UniFlash (download it from my page). A known bug of UniFlash v1.27 is that you can't flash from floppy on K7S5A - but you're flashing from HDD so it should work. Download UniFlash from my homepage.
Posted: Sun Jul 28, 2002 9:37 pm
by fedy2
I have used UNIFLASH 1.27 on HD but they give error to me when verification the written data. Then for being able to make it to leave I must force the type of chip. thanks the same one
Posted: Sun Jul 28, 2002 9:43 pm
by Rainbow
What chip do you have there? Winbond or Mosel/SyncMOS?
Posted: Sun Jul 28, 2002 9:47 pm
by fedy2
winbond 49f002u and chipset SIS735
Posted: Sun Jul 28, 2002 10:21 pm
by fedy2
I have read little of the code a source of your program, and have inasmuch as it uses code assembler for the writing operations on chip, the operations are carried out from procedures called from bios?
Posted: Sun Jul 28, 2002 10:28 pm
by Rainbow
UniFlash does not use BIOS to access Flash ROM.
Posted: Sun Jul 28, 2002 10:44 pm
by fedy2
which verification makes the program in order to control the correctness of the data?
