Page 1 of 1

Epox 8KTA3

Posted: Thu Sep 19, 2002 6:45 pm
by Da Silva
I need some help. On my MB epox I´ve an problem with the boot. The AWARD BOOT BLOCK BIOS, appear and I can´t get boot. I try to make an bootable disk, as the system ask it, but nothing...

N Idea???

Regads

Da Silva
Mozambique
:oops:

Posted: Thu Sep 19, 2002 7:36 pm
by th
Tried to hook up the floppy via an old ISA FDD?
You may also try to find someone, whi can flash the Bios offboard...

Bye
Thomas

Posted: Thu Sep 19, 2002 7:53 pm
by Rainbow
First check your CPU and memory - CPU is common problem on AMD-based boards.

Posted: Fri Sep 20, 2002 9:21 am
by Da Silva
That´s what I have done.... Change Durom to xp, xp to athlon, but nothing.

Since the BootBlock appear how can I reflash or reprog. the Bios again?

Regards

Da Silva

Posted: Fri Sep 20, 2002 10:28 am
by NickS
Did you read the FAQ on the main Wim's BIOS site ? If the bootblock flash is not looking at your diskette drive, try to get hold of an ISA diskette or multi-IO controller if your board has an ISA slot. Otherwise you will have to try hot-swap flash or get someone to program your BIOS ROM.