Page 1 of 1

Black Screen after Flashing Bios

Posted: Mon Oct 28, 2019 12:40 pm
by Sebastianmias1
Hi guys

I had audio problems so i was told to downdate (?) my bios version back from F20 to F1
I have a Gigabyte Ax370 GAming 3 Mainboard
It successfully updated and showed "Rebooting in 3 ..2...1.. seconds"
But after Reboot nothing happened
No beep , nothing .....
I tried to reset the CMOS with the jumper and replaced the battery, but no effect...
The weird thing is that the motherboard has 4 LED indicators which say if a part is not working properly and the GPU LED is red....
Then is swapped to another graphic card, but it is still the same effect.....
Also removing everything except one ram and graphics card dont have an effect..... :(

I hope somebody can help

My data:

CPU Ryzen 7 2700
GPU RX590
power Pure Quiet 11 500W
Mainboard GIGABYTE AX370 Gaming 3

Re: Black Screen after Flashing Bios

Posted: Sat Nov 23, 2019 8:18 pm
by edwin
Your current CPU needs F20 bios AT MINIMUM to function
https://www.gigabyte.com/Motherboard/GA ... upport-cpu
I suggest you try and find/borrow a CPU that is supported by the F1 BIOS.