BIOS Updates forum

Hi everyone!!!

I need do flash correctly BIOS for MSI K7T266 Pro2 v.2.0 (6380) (VIA KT-266A), because when i tried to flash this chip with amiflash, after reset BIOS is flashed badly (Checksum Error / Bad). I've tried many times, but still it's the same. So my question is: Can I do hot swap this BIOS chip on MSI K7T Turbo Limited R (6330) (VIA KT-133A) or MSI KT4 Ultra (6590) (VIA KT-400)???

Thank you for yours replies.

CyberDe@th.

PS.
Sorry for my english, but i'm still learning.

Links to texts about theese mobos are:

MSI K7T266 Pro2
http://www.msi.com.tw/program/products/ ... 0%20Ver2.0

MSI K7T Turbo Limited R
http://www.msi.com.tw/program/products/ ... 0%20Ver3.0

MSI KT4 Ultra:
http://www.msi.com.tw/program/products/ ... EL=MS-6590

CMOS checksum error is normal after flashing Just go into SETUP and save the settings.

I've tried to do this, but system cannot instal propertly.

If you can boot from floppy to flash, can you use Uniflash ?

No, I cannot use UniFlash, because the BIOS chip isn't recognised But I change processor speed (A1700+) and I've installed system (Win98SE) without any problems. Then I've installed WinXP. After that I change processor speed to "normal" and system works stable. I think that, the processor is bad