BIOS Updates forum

Posted: **Sat Oct 18, 2003 2:28 pm**

I have made an bios upgrade with awdflash but when the program tells me to reboot , my screen is black and the pc makes , strange noises.Can anyone help me please??Thanks

Posted: **Sat Oct 18, 2003 4:35 pm**

what board, what bios did you use, what filename and describe the strange nioses please.

Posted: **Sat Oct 18, 2003 7:54 pm**

My board is a Jetway 993an with via apollo pro + chip.I used a bios file from jetway , the file is called 693bsa02.bin , and now my pc doesn´t make the noises but it appears a award bootblock and tells me to put a disk on a:\

Posted: **Sat Oct 18, 2003 10:06 pm**

It may flash from a bootable DOS diskette. You can get a bootable DOS diskette image from Abit at this link:
http://www.abitfaq.it/Files/drdflash.exe
You will then need to put onto the disk the Award flash program, the correct BIOS image and an autoexec.bat file containing the command line to invoke the flash.

Posted: **Sun Oct 19, 2003 12:37 pm**

Can you tell me what is the command that i have to put on autoexec.bat,the bios backup is called biosold.bin , and i use the awdflash.Write the command please...

Posted: **Sun Oct 19, 2003 1:16 pm**

awdflash /Sn /Py biosold.bin

Posted: **Tue Oct 21, 2003 8:35 pm**

Thanks , i will try that and then i tell you something
..

Posted: **Wed Oct 22, 2003 9:51 pm**

I again , i have tried to do the boot disk , but when i insert the diskette, on the screen appears the message:´Non-system disk or disk error´
I have downloaded the bootdisk from bootdisk.com , what do you think that have hapened???( maybe the DOS version is 6.0 and not 6.22 , but i dont know)

Help me...

Korda

Posted: **Thu Oct 23, 2003 9:44 am**

Can you test the boot diskette in another PC (without the flash command in autoexec) ?

Posted: **Thu Oct 23, 2003 4:00 pm**

yes i can try that , i tell you something later

Posted: **Fri Oct 24, 2003 6:56 am**

I hope you executed the file you downloaded from bootdisk.com to make a bootdisk and didn't copy it to the floppy, that won't work.

execute the bootdisk.com file to make a bootable floppy, then copy awdflash.exe and your biosold.bin to it and edit the autoexec.bat file with the command.

Posted: **Fri Oct 24, 2003 9:33 am**

that error occurs because my version of DOS is 6.0 , but when i try to run on Dos the awdflash and load my bin file it says that my bios haven´t been upgraded.But afternoon i will try other bin file.

Keep in touch... :roll:

Posted: **Wed Oct 29, 2003 11:18 pm**

Yeahhhhhhhhhh....
We won against the machines 8) .......
I flash my pc with the correct bios file and now it works perfectly.....

Thanksss people , you´re the best :D .....

Keep that work . . . :wink:

Posted: **Wed Oct 29, 2003 11:20 pm**

happy to hear things worked out. and you're welcome.

BIOS Updates forum

My pc doesn´t work

My pc doesn´t work