Page 1 of 1
asus p3v4x
Posted: Sun May 05, 2002 2:41 am
by docpan
I used the asus aflash to flash a p3v4x. the flash worked but I fouind out I flashed with the wron bios update. Now system will not boot no floppy boot either. What can I do?
Posted: Sun May 05, 2002 11:23 am
by Rainbow
Posted: Mon May 06, 2002 6:38 pm
by docpan
I tried to hot flash using uniflash. Uniflash does not reconize the flash memory chip. When I try with aflash I get a data compare error.
Posted: Mon May 06, 2002 7:56 pm
by Rainbow
Maybe the board you used is not compatible with UniFlash. You may try this
http://ftp.gigabyte.com.tw/support/temp/flash855.zip
Posted: Tue May 07, 2002 3:18 am
by docpan
flash855 does not recognize the flash chip
Posted: Tue May 07, 2002 8:54 pm
by Rainbow
What board are you trying to hot-flash on?
Posted: Tue May 07, 2002 10:07 pm
by docpan
it is an asus tx97
Posted: Wed May 08, 2002 11:46 am
by Rainbow
Posted: Wed May 08, 2002 7:44 pm
by Denniss
P3V4X has 256KByte Bios and TX97 Series 128KByte - TX97 has no support for 256KByte Bioschips .
How was it possible to flash the wrong Bios with Asus Aflash ? This tool gives a warning if using wrong Bios !
Is it possible that the hlaf-flashed Chip will start emergency Bios with the P3V4C ?
What type of Chip is the P3V4X ? > Atmel 29C020 ?
Posted: Thu May 09, 2002 3:22 am
by docpan
It is a MOSEL V29c51002t. You do stupid things when you rush.
