Asus CUSL2-C died because flash failure
Posted: Sat Jul 10, 2004 2:22 pm
Hi there.
I wanted to flash BIOS of the CUSL2-C, I got a flash failore after erasing the EEPROM, so probably now I may have completely no BIOS on my board. It was not possible to try again flashing as long as the machine was running. Now at start mainboard is dead, except some beeps which are not documented.
Does the CUSL2-C already have any recovery options?
I wanted to flash BIOS of the CUSL2-C, I got a flash failore after erasing the EEPROM, so probably now I may have completely no BIOS on my board. It was not possible to try again flashing as long as the machine was running. Now at start mainboard is dead, except some beeps which are not documented.
Does the CUSL2-C already have any recovery options?