Page 1 of 1

Unable to start the PC (PCchip963g) i need the original rom

Posted: Mon Jul 26, 2004 2:00 am
by Loslo
Hi:

My english sucks, sorry, but i gonna try to explain my problem

i have a pc chips M963G(the version, isn't print on motherboard, but i guess is 3.1 (on back cover of manual apear 3.1 version).

i had the problem that the hardisk and CD rom (both on primary IDE, master and slave) only recongiced when i reset the pc. i solve this, the trouble was the ultradma ide cable, was connected on wrong way.

But after to solve the previus problem, i upgrade the bios flash. with 040510S.rom using amiinf340.exe to do that(both files downloaded from pchip site).

And now, the PC dont start, only if i move jumper to reset CMOS memory start, but when i reset or start again nothing happends, no video, no beeps, nothing.

then i think battery problem, i tried with another, an nothing happend.

so i think is a problem with the version of bios, but i couldn`t find the previus version on pcchips site. Someone have this rom file???, or someone knows how to solve my problem???

please help.
thanks

Posted: Mon Jul 26, 2004 2:57 am
by ajzchips
Remember the release date of your original?

Posted: Mon Jul 26, 2004 8:15 pm
by Loslo
i solve the problem, i search on inet, an flashed a previus bios, then for advice: if you have a M963G DONT flash :?

than you any way :D

Posted: Tue Jul 27, 2004 10:28 am
by Denniss
Pcchips lists Rev 1.3 and Rev 3.2 on it's website - you have to look at your board maybe near the keyboard connector to find your revision number .
Manual revision and motherboard revision are two completely different things !