Asus CUSL2 mobo dead
Posted: Fri Nov 19, 2004 11:04 pm
Hi there.
I wanted to flash BIOS of the CUSL2, I got a flash failure after erasing the EEPROM, so probably now I may have completely no BIOS on my board.Now at start mainboard is dead, no beep, except if I build off the CPU, then I became the signal, that is no or a corrupted cpu on board. I've tried to make all the recover options as clearcmos ( CLRTC ) or remove battery, but the mobo won't start. Any idea? It's an AWARD Modular BIOS 6.00PG. thx for help!
I wanted to flash BIOS of the CUSL2, I got a flash failure after erasing the EEPROM, so probably now I may have completely no BIOS on my board.Now at start mainboard is dead, no beep, except if I build off the CPU, then I became the signal, that is no or a corrupted cpu on board. I've tried to make all the recover options as clearcmos ( CLRTC ) or remove battery, but the mobo won't start. Any idea? It's an AWARD Modular BIOS 6.00PG. thx for help!