Page 1 of 1

Shuttle SN95G5 - I changed a PCI BIOS setting and it's dead?

Posted: Mon Feb 07, 2005 7:23 pm
by shot2bits
Hi All - I've built my own system and have recently encountered the blue screen of death when installing a new Win PVR 500 card.

Anyway, in my rush to get the thing working, I've changed a setting in the BIOS which has something to do with PCI - it was an option which you could enable or disable but I cannot remember what the heck it was... Anyway, net result is the machine is dead - there is power and I can reset but there is no output at all - the monitor has no input anymore - it doesn't even show the BIOS.

PLEASE HELP!

Posted: Wed Feb 09, 2005 10:58 am
by Toby B
clear the CMOS...