Page 1 of 1

bios recovery

Posted: Mon Oct 10, 2005 3:05 am
by kymmy2
I have a packard bell imedia,columbia 5 motherboard,we are wanting to no what floppy disk is required in bios recovery mode,as set by motherboard jumper,does anyone understand this.

Posted: Tue Oct 11, 2005 12:19 pm
by NickS
Your other post mentions what could be a Columbia IV depending on motherboard version - be careful.
From Packard Bell:
As the Columbia 5 and Columbia 5P motherboards have different BIOSes, it is important to know how to easily identify them, in order to avoid mis-flashing the BIOS.

Solution
The overview below shows the differences between the two motherboards.
Physical
Columbia 5P has a label in the lower left corner marked NF7 and has a front audio connector
Columbia 5 has a label marked NF5 and does not have a front audio connector.
Components
The Columbia 5P videodriver will list the display adapter as SiS651C.
The Columbia 5 videodriver will list SiS650/651 instead.
BIOS
BIOS of Columbia 5P shows 8SIMLNF-NF7 in the main BIOS screen.
BIOS of Columbia 5 shows no code in the main BIOS screen.
Does the description tie up with the Columbia 5/V ? I assume you used the system serial number to identify the board?

wims bio form

Posted: Tue Oct 11, 2005 10:01 pm
by kymmy2
thanks yes it is a nf5,so will try an see what happen if not think new motherboard,.