Page 1 of 1
ECS 741GX-M Bios Problem
Posted: Fri Jun 15, 2007 7:21 am
by rei_ayanami
Hello. I have a problem with my motherboard, recently my friends update the bios of my Mobo using the flash bios for windows. it was successful to flash the bios, after we restart the pc. my pc won't startup. It display my video card information but it restart again and again. I can't see the BIOS startup. How can I resolve this? Need Help Thanks!
Posted: Fri Jun 15, 2007 8:20 am
by rei_ayanami
Im also tried the AWARD bios recovery, I created a boot disk from win98 at get the latest bios of my mobo with the awdflash.exe. I set the disk drive and turn on my pc. The Video Card information displayed and then it restarted and again and again. How can I boot using my bootdisk? Please Help! Thanks!
Posted: Fri Jun 15, 2007 1:37 pm
by Denniss
Clear CMOS via Jumper, read your manual how to do this.
Are you really sure you picked the right Bios, matching your board and board revision ?
Posted: Sat Jun 16, 2007 7:24 pm
by j_saade25
as Deniss said, the jumper is usually close to the mainboard's battery and shorting pins 1-2. remove it and short pins 2-3 for a while and then put it back to the original position (1-2).
Note that you must disconnect the computer's power cable before doing the procedure.
