BIOS Updates forum

Posted: **Sat Mar 01, 2008 2:56 am**

Hi to all.

pls. help me to find a solution of my MOBO ECS K7VTA2 PRO. VER 3.1 because it has no. beep, and no display.. pls. give me an solution to figure out this problem.

Posted: **Sat Mar 01, 2008 11:10 am**

1) check the mainboard for visible damages
2) reset the cmos
3) measure the voltages (atx, vcore, vdimm, vchipset)
4) check if the cpu cooler gets warm (disconnect the cpu fan)
5) sell it on eb*y as untested ;)

Posted: **Sat Mar 01, 2008 3:01 pm**

might be badcaps problem

http://www.badcaps.net

Posted: **Sun Mar 02, 2008 12:47 pm**

might be badcaps problem

yeah, or the FETs of the switching regulator blown due to the bad caps or just ... anything else :)

BIOS Updates forum

My MOBO ECS K7VTA2 PRO. VER 3.1 HAS NO BEEP.

My MOBO ECS K7VTA2 PRO. VER 3.1 HAS NO BEEP.