Page 2 of 2
Posted: Sat Oct 22, 2005 11:02 pm
by PGM
When your computer boots from CD in order to install Windows, hit F5. Wait, a menu will appear, select ACPI. Of course, you must enable ACPI in Power Management Setup.
ACPI issues
Posted: Fri Feb 03, 2006 7:55 am
by meshwire
my pc does shut down but manually must be turned off by the AVR im using win xp SP2 it does shut down but it only shows the message "its now safe to turn off your computer" i was using win 98 before and it shuts down automatically after it says the message "its now safe to turn off your computer"
heres the specs
Bios date 01/15/99
Bios type award modular bios v4.51pg
OEM sign on: V.791BS_2 A06
Bios ID 01/15/99-691-586B-W877-2A6LFJ1CC
Chipset : VIA 82C691 rev1
CPU: Intel celeron MMX 300aMhz
Ram :129
Board by Jetway J-791BS
Thanks
Posted: Sat Feb 04, 2006 5:15 am
by ajzchips
In the Device Manager you'll have to unhide an entry that's called "NT Legacy APM...." and activate it.
Nt amp legacy activation dint work
Posted: Sun Feb 05, 2006 12:00 pm
by meshwire
Nt legacy AMP activation dint work
what will be the next option? Is it the BIOS? can it be upgraded? is there an upgrade?
Posted: Sun Feb 05, 2006 8:00 pm
by ajzchips
the jetway company has removed their links
Posted: Fri Feb 10, 2006 12:59 pm
by meshwire
too bad there a link on the jetway site but the download link is no longer avail ....
Posted: Fri Feb 10, 2006 8:10 pm
by KURIAKI
Jetway site has changed:
http://210.201.178.76/evisn/download/bios/download1.htm
Follow the link under Slot 1, 791B/R2
Posted: Sun Feb 12, 2006 9:20 am
by Ritchie
In Windows 2000, and probably also XP, you can install with APM support by pressing (I think) F7 when setup starts.
If the problem is simply that you cannot install because you do not have ACPI support, you may be able to do something similar to install with APM support.
