Page 1 of 1

M571 V3.2A +RAM PC133

Posted: Sat Apr 19, 2003 1:29 am
by muhon_zen
I have a TXPRO II (PC Chips). Model: M571 V.3.2A. I would like to know if my board supports PC133 RAM Memmory. I am already using PC100.

Posted: Sat Apr 19, 2003 3:16 am
by Denniss
The M571 supports all SDRAM speedgrades but it's limited to 128MB sticks
The only working 128MB sticks are double sided ones with 16 memory chips
It might be possible that higher capacity sticks are working but with capacity cut in half or quartered

Posted: Sat Apr 19, 2003 10:10 pm
by apple_rom
About memory. SiS5597 (TXpro II) support 64Mbit-technology -> means can run with memory up to 256Mb/16chips (doubleside), 128Mb/8chips (singleside) etc.

Posted: Mon Apr 21, 2003 6:42 pm
by rmay635703
Yep ditto on the speedgrades but

apple_roms assumption that 256mb 16chip "low density" dimms work on the m571 isn't entirely correct. The latest m571 bios has major issues with timing on large dimms 128mb+ and usually won't post with a 256mb 16chip low density dimm. (I have tried 12 different brand 256mb low density dimms that all work properly in an intel TX system but fail on the m571, others have tried and failed on the lottery as well)

The work around I have found (if you don't mind using an old cyrix chip and a HD overlay) is to use the old m567 bios on the m571 as it correctly supports large SDRAM dimms without being extremely picky or unstable.

This issue as been beaten to death on the lottery by the way.

Apple_roms would you be willing to take the m567 bios and see what routines it uses for ram handling? Maybe you could overlay parts of the new m571 bios so the old one so you could get a bios that would both support large dimms and k6-2's with bigger hds as opposed to lots of ram but slow cpus or fast cpus but less ram.

Cheers
Ryan

Posted: Mon Apr 21, 2003 7:31 pm
by Rainbow
I had M571LMR board. With 64MB module (8 chips), it ran fine. However with 128MB module (8 chips), it counted 128MB and hanged there. Nasty BIOS bug. I sold it together with the 64MB module.

Posted: Mon Apr 21, 2003 10:41 pm
by apple_rom
Apple_roms would you be willing to take the m567 bios and see what routines it uses for ram handling? Maybe you could overlay parts of the new m571 bios so the old one so you could get a bios that would both support large dimms and k6-2's with bigger hds as opposed to lots of ram but slow cpus or fast cpus but less ram.
I can to do this with Award (i was try and all fine work with like problem for VIA VPX), but can`t with AMI (at this time). But you can sent to me (k6-2@narod.ru) bioses from M571/M567 - i will try...