Page 1 of 1

Shuttle HOT-637/P ram prob

Posted: Sun Apr 03, 2005 8:58 pm
by bohdy
Hello, I recently bought a single sided SD stick rated at PC133. On the stick it says "8mb x 16", and it is supposed to be 128MB, but it is only detected by my MB as 64MB.

I have tried this Bios:
http://wims.rainbow-software.org/ajz/Sh ... .x_3.x.zip

And the full size was detected. I experience random errors with that Bios so I had to revert, though.

Any advice?

Posted: Sun Apr 03, 2005 11:35 pm
by ajzchips
Are you positive the RAM module is 100% fine?

Posted: Mon Apr 04, 2005 5:23 am
by bohdy
No, I'm not really. Last time I had it working properly, though, I successfully ran the memtest86 test while using it, but later it caused corruption.

I'm just not sure whether it is the ram or the bios/mobo playing up.

Posted: Mon Apr 04, 2005 7:29 am
by bohdy
Just an update:

I have just found and tried a "beta" bios here, and now the stick is properly recognized, and seems to work just fine.

Code: Select all

637WIQ06.BIN : (beta)
        1. fix support 128MB DIMM modules
Hopefully this will help anyone else who runs into this problem.