eMachines T6000 - two sticks of Ram not working together!
Posted: Wed Sep 06, 2006 11:05 pm
I have an eMachines T6000, running PC3200 DDR RAM. It came with a 512mb stick.
hoping to make my system run 1.5gb ram, I recently bought a 1gb stick. But when both sticks are in and I turn on the PC, it won't boot up and the motherboard keeps beeping. But when only one of either stick is in, it boots up fine.
I have two slots for memory and supposed to be 2gb max, so I'm not sure why it's not working. I was told the problem has to do with timings and I have to fix it bios, but in my bios, there is no chipset option!
Please help! What can I do? Thanks very much in advance!
hoping to make my system run 1.5gb ram, I recently bought a 1gb stick. But when both sticks are in and I turn on the PC, it won't boot up and the motherboard keeps beeping. But when only one of either stick is in, it boots up fine.
I have two slots for memory and supposed to be 2gb max, so I'm not sure why it's not working. I was told the problem has to do with timings and I have to fix it bios, but in my bios, there is no chipset option!
Please help! What can I do? Thanks very much in advance!
