A8N-E: need 1 extra memory timing badly
Posted: Fri Jan 05, 2007 3:59 am
In short, i need to set Read Preamble timing manually in bios setup (or even flash fixed value).
The whole story, u may skip it. Damn mobo sets RP to useless 9 ms, my memory (ddr400 of course) cant go past 135 (270ddr) frequency with such crazy setting (common working values are about 4 to 6 ms) This only happens at higher FSB's, at 200MHz Read Preamble is ok, but hell! who needs mere 200 FSB. My cpu and mobo worked at 300x9 fine (with another memory). But now i cant boot at 300MHz, and the only obstacle is this timing.
Original BIOS => click.
Thanks in advance.
And sorry if i posted in wrong forum.
The whole story, u may skip it. Damn mobo sets RP to useless 9 ms, my memory (ddr400 of course) cant go past 135 (270ddr) frequency with such crazy setting (common working values are about 4 to 6 ms) This only happens at higher FSB's, at 200MHz Read Preamble is ok, but hell! who needs mere 200 FSB. My cpu and mobo worked at 300x9 fine (with another memory). But now i cant boot at 300MHz, and the only obstacle is this timing.
Original BIOS => click.
Thanks in advance.
And sorry if i posted in wrong forum.