Page 1 of 1
Asus Med 2001
Posted: Sun Feb 13, 2011 10:59 pm
by adymaster
I have this old MOBO and I want to mount on it FX5700 or FX5200.But my question is It work?AGP slot is maxim 1x and 2x.
Re: Asus Med 2001
Posted: Mon Feb 14, 2011 12:59 pm
by edwin
Asus CUV4X-CM in a Medion PC.
I have seen reports of a FX5200 card working in the slightly older P2B series from Asus from the same era so yes, it should work, just make sure it has 3.3V support (should say so on the box).
Re: Asus Med 2001
Posted: Mon Feb 14, 2011 4:23 pm
by Denniss
VIA VT82C694X-Chipset = AGP4x-capable.
Re: Asus Med 2001
Posted: Mon Feb 14, 2011 5:13 pm
by adymaster
Work FX5700 or just FX5200?But voltage is 3,3.I hope you do not burn
Re: Asus Med 2001
Posted: Tue Feb 15, 2011 6:24 pm
by Denniss
AGP4x = 1,5V, the AGP4x-capability just does not show up probably because it's disabled by the VGA card or the VIA aGP driver.
Re: Asus Med 2001
Posted: Wed Feb 16, 2011 12:30 am
by edwin
